Grow cucumbers indoors or outdoors all year long with the Kratky method: no weeding, no pumps, no electricity.

Supplies

EC and pH Meter for Kratky

An EC and pH meter for Kratky takes the guesswork out of the one job you do at the start: mixing the solution. For cucumbers the EC meter matters most, because Kratky's method gives a target EC of 2.0 to 2.5 mS/cm.

Cucumbers grown on a Kratky solution checked with an EC meter

Affiliate disclosure: some product links on this page are affiliate links. If you buy through one, Kratky Cucumbers may earn a commission at no extra cost to you. See our terms of use.

Start With an EC Meter

An EC (electrical conductivity) meter measures how much fertilizer is dissolved in the water. It tells you whether the container is at Kratky's 2.0 to 2.5 mS/cm for cucumbers, whatever brand of fertilizer you use and whatever is already in your tap water. You only need it at mixing time, so a simple pen meter is enough.

Watch the ppm scale

Many cheap meters read in ppm (parts per million), labeled TDS, not EC. They convert EC to ppm with different factors: a 500-scale meter reads EC 2.0 as about 1,000 ppm, and a 700-scale meter reads it as about 1,400 ppm. Buy a meter that shows EC directly, or check which scale it uses.

A pH Meter Is Optional

Kratky's papers don't give a pH target, and you won't adjust pH during the crop. A pH pen is useful for checking your water and the freshly mixed solution once, aiming for slightly acidic, about 5.5 to 6.5. If your tap water is soft and your fertilizer is made for hydroponics, you may never need to adjust it.

What to Look For

  • Automatic temperature compensation (ATC), so cold or warm water doesn't throw the reading.
  • Calibration: pH pens need calibrating with buffer solution, and EC meters with a calibration solution. Buy the solution with the meter.
  • Storage: pH probes must be kept moist in storage solution, or they drift.

How to use the readings is on Kratky nutrients for cucumbers.

Sources